|
|
|
|
|
| | Oil & Grease Remover is a water-based product designed for the effective removal of oil and grease contamination from concrete substrates. It penetrates the pores of concrete surfaces and emulsifies oil and grease residues, providing a clean and contaminant-free surface prior to coating or further treatment. | | |
| • Removal of oil and grease from concrete floors and concrete substrates
• Surface preparation prior to application of coatings or finishing systems
| | |
| • Effective removal of oil and grease from concrete surfaces
• Penetrates concrete pores to emulsify embedded contaminants
• Ready to use – no thinning required
• Can be applied at ambient temperatures
• Does not require special application equipment | | |
| | • Method of Application : | Brush or spray | | • Application Temperature : | 5°C to 30°C | | • Note : | 1. Apply the product evenly onto the contaminated concrete surface.
2. Scrub thoroughly using a stiff or hard wire brush to ensure penetration into the substrate pores and effective emulsification of oil or grease.
3. Allow a minimum dwell time of 30 minutes.
4. Remove the emulsified oil and grease from the surface and substrate pores using high-pressure hot water jetting.
|
| | |
| | • Color : | Colorless liquid | | • Specific gravity : | 0.92 kg/L |
| | |
| Clean the surface from loose dirt and contaminants using high-pressure hot water jetting.
Prepare the concrete substrate mechanically, if required (e.g. milling, shot blasting), to ensure the pores of the substrate are open and capable of absorbing the product
| | |
| • Store in a cool, dry, and well-ventilated area.
• Protect from heat and direct sunlight.
• Keep containers tightly closed when not in use.
• Shelf life is at least 12 months from the packing date when stored in unopened original containers at temperatures between 10°C and 40°C.
| |
|
|
|
|
information in this data sheet and in all our data sheets are given to the best
of our knowledge based on laboratory testing and practical experience. Final results
depend on following instructions and on consumer skill. Our responsibility is limited
to providing products that Conform to samples and specimens provided by us. Due
to technical needs, we reserve the right to change any given specification without
notice.
|
|
|
