|
|
|
|
|
| | One component acrylic finishing coat. | | |
| | Used in areas that should be luminous when exposed to light. | | |
| • Luminescence of the color of coated surface when exposed to light.
• Excellent UV and weather resistance.
• High durability.
• Good color retention.
• Good hiding power.
• Short drying time.
| | |
| | • Method of Application : | Brush or Conventional spray. | | • Mixing Ratio : | (by volume)
Fluorescent Paint Thinner (S507 “known as Acrysol”)
1 Litre 0.20 Litre
Stir well before mixing, no dilution is required when brush is used for application. | | • Cleaner : | Clean applying tools by S501 or S502 thinner. |
| | |
| | • Color : | Green, Yellow, Orange, Red. | | • Gloss : | Semi-gloss | | • Volume Solids : | 40 % (ASTM-D2697) | | • Flexibility : | Good | | • Adhesion : | Good | | • Recommended film thickness : | 50 microns “dry” | | • Theoretical spreading rate : | 8 m²/L at 50 microns “dry” | | • Specific gravity : | 1.02 kg/L (DIN 51757) | | • Number of Coats : | 1 | | • Packaging : | 0.5 L in metal can |
| | |
| | Suitable substrates: It is recommended to apply Fluorescent Paint directly on previously coated substrates. Be sure that the coated substrate is clean and free from oils, greases, and any other contaminants | | |
| | • Dry to Touch : | 30 minutes (ASTM-D1640). | | • Dry to Handle : | 4 hours (ASTM-D1640). |
| | |
| • Fluorescent Paint is classified under high flammable materials. Containers must be kept tightly closed in a cool and well-ventilated place, protected from heat and direct sunlight.
• Shelf life is two years from packing date in unopened original containers at 10 to 40°C.
Safety:
• Well-ventilated conditions should be provided during application.
• Do not breathe or inhale mist.
• Wear air-mask and avoid skin or eye contact.
| |
|
|
|
|
information in this data sheet and in all our data sheets are given to the best
of our knowledge based on laboratory testing and practical experience. Final results
depend on following instructions and on consumer skill. Our responsibility is limited
to providing products that Conform to samples and specimens provided by us. Due
to technical needs, we reserve the right to change any given specification without
notice.
|
|
|