|
|
|
|
|
| | WT06 is a water emulsion acrylic finishing coat. | | |
| | Used as a matte coating on all exterior and interior surfaces prepared with "WT05". It is ideal for use in painting homes, laboratories, hospitals, and in all decorative works. | | |
| • High flow properties prevent roller or brush marks.
• Excellent resistance to water, cleaners, and soaps.
• Excellent resistance to weather and UV rays.
• Excellent adhesion and high flexibility.
• High coverage and short drying time (which speeds up the time of painting the other side).
• Easy to clean and maintain in addition to being economical.
• Odorless and can be used in all places where solvents-based coatings are prohibited.
• Multiple colors are available to suit all tastes and requirements using a color mixing machine.
• Anti-bacterial paint is available in authorized sales centers.
• WT06 is recommended for use under the Marbel ALK or Marbel AQ material if you want to decorate interior walls. | | |
| | • Method of Application : | By brush, roller, or pressure spray (spray gun not recommended). | | • Mixing : | The can should be stirred well before application to obtain a homogeneous mixture. | | • Thinner / Cleaner : | water is used to reduce viscosity or for cleaning. The mixing ratio with water depends on the application tool. For example, in the case of pressure spray at a temperature of 20°C, there is no need for dilution, and in all other cases (brush or roller), it is possible to dilute up to approximately 15% volume with water. | | • Application Temperature : | 10-40°C | | • Note : | When painting the other side, drying time should be taken into account. |
| | |
| | The surface must be clean, dry, and free from any grease, dust, or other contaminants that may affect adhesion | | |
| | • Dry to Touch : | 20 minutes (ASTM-D1640) at a temperature of 20°C | | • Dry to Handle : | 1 hour "minimum time for painting the other side" (ASTM-D1640) | | • Note : | drying time is affected by several factors such as ventilation, the thickness of the Coating layer, and temperature. Higher temperatures lead to shorter drying times. |
| |
|
|
|
|
information in this data sheet and in all our data sheets are given to the best
of our knowledge based on laboratory testing and practical experience. Final results
depend on following instructions and on consumer skill. Our responsibility is limited
to providing products that Conform to samples and specimens provided by us. Due
to technical needs, we reserve the right to change any given specification without
notice.
|
|
|
