|
|
|
|
|
| | One component nitrocellulose putty. | | |
| | Used mainly for filling and leveling furniture surface irregularities. | | |
| 1- Fast drying.
2- Excellent filling properties.
3- Easy spreading and sanding.
4- Excellent adhesion properties.
5- Compatible with a wide range of primers / surfacers. | | |
| | • Method of Application : | Suitable putty knife. | | • Cleaner : | Clean applying tools by S501 or S502 thinner. | | • Note : | When recoating, a special attention should be taken toward dry to sand time. |
| | |
| | • Color : | White, Gray | | • Volume Solids : | 35% (ASTM-D2697) | | • Flexibility : | Good | | • Adhesion : | Good | | • Sandability : | Excellent | | • Recommended film thickness : | 200 microns maximum “dry, after sanding” | | • Theoretical spreading rate : | 3.5 m²/L at 100 microns “dry” | | • Specific gravity : | 1.218 Kg/L (ASTM-D1475) | | • Number of Coats : | several coats | | • Packaging : | 3.6 L in US Gallon or 0.9 L in US Quart |
| | |
| Coating performance is, in general, proportional to the degree of surface preparation. Surface must be clean, dry, and free of oil, grease, and other contaminants prior to filling.
It is recommended to apply NCL Putty directly over surfaces primed by a suitable primer/surfacer such as: OMEGAN Primer/Surfacer(2k), SYN203 Primer, or NCL Primer/Surfacer.
Sanding: When sanding, a special attention should be taken toward dry to sand condition.
Recoating: Fine sanded NCL-Putty should be coated by a suitable primer/surfacer such as: OMEGAN Primer/Surfacer (2k), SYN203 Primer, or NCL primer/surfacer. | | |
| | • Dry to Touch : | 10 minutes (ASTM-D1640). | | • Dry to Handle : | 30 minutes (ASTM-D1640). | | • Dry to Sand : | 2 hours “minimum recoat time” | | • Note : | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times. |
| | |
| NCL Putty is classified under high flammable materials. Containers must be kept tightly closed in a cool and well-ventilated place, protected from heat and direct sunlight.
Shelf life is three years from packing date in unopened original containers at 10 to 40°C.
Safety:
1- Well-ventilated conditions should be provided during application.
2- Do not breathe or inhale mist.
3- Wear air-mask and avoid skin or eye contact. | |
|
|
|
|
information in this data sheet and in all our data sheets are given to the best
of our knowledge based on laboratory testing and practical experience. Final results
depend on following instructions and on consumer skill. Our responsibility is limited
to providing products that Conform to samples and specimens provided by us. Due
to technical needs, we reserve the right to change any given specification without
notice.
|
|
|